Warm white blinder / strobe / eye-candy fixture
The Martin VDO Atomic Dot WRM hybrid lighting and video fixture, also available in a CLD color temperature variant, combines a small blinder, compact strobe, video-pixel and small spotlight.
By combining a video-controlled Aura backlight and a bright blinder/strobe dot in one fixture, lighting designers are empowered with greater creative potential to make a bigger impact with audiences than ever before. The fixtures’ compact design also gives designers the ability to place VDO Atomic Dots just about anywhere and deploy them in larger quantities. Integrated support for P3, DMX, Art-Net and sACN eliminates the need for additional interface boxes and onboard P3 eases pixel mapping and using the product as a video controlled blinder or strobe.
The integrated interlocking mechanics allow multiple VDO Atomic Dots to be combined in battens, arrays or creative shapes. While the hybrid cable carrying DMX, Art-Net, sACN and P3 makes connections easy and fast. VDO Atomic Dots are ideal for rental customers and lighting designers working in concert/touring and TV show sets as well as supporting corporate and nightclub clients.
DUAL LAYER FIXTURE
A high-power, warm white beam combined with a pixel-controllable RGB Aura backlight enables truly unique effects. Both layers can be controlled individually via P3, DMX, Art-Net, sACN or a mix.
COMPACT AND LIGHTWEIGHT
Packs a lot of punch from a very compact fixture that can be used and hidden in any application. Internal power supply and IP65-rated housing increase usability of this fixture in various applications.
EASILY COMBINE MULTIPLE FIXTURES IN ARRAYS
The smart interlocking mechanics allow fixtures to be combined into battens, arrays or creative shapes. Creative imagination is your only limit.
HYBRID DATA AND POWER CABLE
The hybrid power and data cable carries all power and data for the fixtures, allowing them to be daisy-chained very easily in large quantities.
FRONT-ACCESSORY HOLDER
The industry-standard PAR30-sized front-acessory holder can hold a diffuser to widen the beam-angle of the fixture. It also fits standard barndoors to give the fixture an artistic look on stage.
Warm white (2700K) beam/blind/strobe/eye-candy fixture
2850 lumen boost/strobe
1400 lumen continuous
Beam angle of 11 degrees
Field angle of 22 degrees
Pixel-controllable RGB Aura backlight
Compact form-factor
Built-in power supply (100-240V)
Power and Data IN & THRU via hybrid cable (PDE System)
P3, DMX, Art-Net & sACN compatible
Built-in pixel-FX on backlight and beam
Front-accessory holder for barndoors and/or diffuser/lens
Detachable yoke-assembly
Smart interlocking mechanics to build battens, arrays and creative shapes
Compatible with Martin VDO Atomic Bold interlocking mechanics for mixed arrays
Passive cooling
IP65 rated
SPECIFICATIONS
Width excluding hanging bracket: 130 mm (5.1 in.)
Width including hanging bracket: 175 mm (6.9 in.)
Height excluding hanging bracket: 134 mm (5.3 in.)
Height including hanging bracket: 242 mm (9.5 in.)
Horizontal fixture spacing: 150 mm (5.9 in.) (center-to-center using interlock couplers)
Vertical fixture spacing: 150 mm (5.9 in.) (center-to-center using interlock couplers)
Depth: 146 mm (5.7 in.)
Weight including hanging bracket: 2.2 kg (4.85 lbs.)
Weight excluding hanging bracket: 2.0 kg (4.41 lbs.)
OPTICS
Lens Diameter: 95 mm
Front Accessory Holder: PAR30 size
ELECTRICAL
AC power: 100-240 V AC nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch mode
Typical half-cycle RMS inrush current at 230 V, 50 Hz: 1.1 A
Typical earth-leakage current: 0.25 mA
Power Factor: 0.99 @ 100 V , 0.98 @ 120 V , 0.95 @ 208 V , 0.96 @ 230 V , 0.94 @ 240 V
Max current draw: 0.6 A @ 100 V / 120 V , 0.3 A @ 208 V / 230 V / 240 V
Typical current draw: 0.5 A @ 100 V , 0.4 A @ 120 V , 0.2 A @ 208 V , 0.2 A @ 230 V , 0.2 A @ 240 V *
Power Consumption
Maximum: 55 W
Typical: 50 W *
Idle: 4 W *
* Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
Typical: full output white.
Idle: no output.
020 8659 2558
