Full Fat Audio - FFA 2004/8004 HD Amplifier

Full Fat Audio - FFA 2004/8004 HD Amplifier

The FFA-2004 HD and FFA-8004 HD are high performance four channel power amplifiers.

These amplifiers are ideally suited for use with premium cinema sound systems.

FFA’s rugged, high current power supplies respond to the lowest musical notes and audio special effects. The mechanics are built to the same exacting standards as FFA’s professional live sound and night venue products. The FFA-2004 HD features a new silent cooling system so can be installed where equipment noise would normally cause a nuisance..

These class D amplifiers use highly efficient electronic technology to run cool and use less mains supply power. The precision analogue circuits give a very stable sound stage with excellent signal to noise ratio. The sound experience is wholly musical and natural which will enhance the cinematic performance.

Designed and made in England with a 6 year warranty.

Suitable Applications

Any sound system that is required to deliver best audio performance

Long term power delivery in any environment

Home residential cinemas

Professional test screening rooms

Commercial cinemas

Live theatre sound

Conference rooms

AV systems

Night venues

Cruise ships

Power Ratings - FFA-2004 HD:4 x 500W ref 4 Ohms, 4 x 250W 8 Ohm 4 x 1000W ref 2 Ohms FFA-8004 HD:4 x 2000W ref 4 Ohms, 4 x 1000W ref 8 Ohms Note: Channel pairs can be bridged to drive very high power 8 Ohm subwoofers

Gain - FFA-2004 HD – 20dB FFA-8004 HD -28dB

THD - THD+N Typical 0.05 4% Ohm 1kHz

Frequency Response - 20Hz - 20kHz +- 0.5dB

Controls - 40 Point Potentiometer per channel, power on switch Indicators signal green = -20dB, signal yellow = -3dB, red signal = clip, signal red protect = over current, low AC mains or 3 sec. mute on power up

Load Protection - DC on output, precision clip limiter circuit

Amplifier Protection - Short circuit, current overload, thermal shutdown, high frequency stability circuit

Audio Signal Inputs - Balanced Neutrik® Female XLR input connected Pin 1 - GND, Pin 2 - Hot +, Pin 3 - Cold - .

Audio Power Outputs - Neutrik® speakON each channel. Channels 1 and 3 output speakON utilises 2+ and 2- connection to allow use of 4 core loudspeaker cable for bi amp loudspeaker system. Bridged output

Power Requirement - 1 x Neutrik® 20A powerCON connector 1 x 16A 230 VAC Circuit. Power range 185V-230VAC 120V (configured at factory)

System Cooling - High CFM 80mm fan with proportional signal speed control. Rear to front airflow

Dimensions - 88mm Height x 483mm Width x 510mm Depth. Includes rear rack support. 19" rack mount enclosure

Weight - 10 kg