GREEN-GO GGO-BRIDGEX NETWORK BRIDGE 26-781

GREEN-GO GGO-BRIDGEX NETWORK BRIDGE 4x interface streams, 1U

Connect events globally via the Internet or a private network

Two or four independent streams of bridge interface

Connect to two or four remote sites

No loss of speech clarity

Pass 'Call' alert signalling between sites

Group bridge and user access modes

Compact desktop or 1U rackmount format

Bridges have four Ethernet ports, two for internal and two for external networks. The internal ones are normally used for connecting to a Green-Go network local to the bridge unit. One of the internal network ports can be used for powering the bridge via POE. Alternatively, the bridge can be powered with an external power supply. The external ports are used for connecting to the Internet or a private network. The bridges should have fixed IP addresses assigned on External networks. These should be chosen from the same range of IP addresses as is used on the local network, but outside the range of any addresses offered by the router or a DHCP server. Care should be taken to avoid using an IP address that is already in use. UDP port forwarding should be set up in a firewall between the Internet or a private network and a bridge in one of the sites.

Each bridge interface stream can be used in one of two modes, group bridge mode or user access mode.